Micro Carbon Residue and Ash Tester

Description

The Micro Conradson Carbon Residue and Ash Tester features a display screen that allows for friendly and easy use of the apparatus. All access to the calibration, maintenance, language selection, and safety parameters are achieved through the keyboard and protected by a password. A manometer located in the front of the instrument displays the admitted pressure and a flow meter reads the gas flow in the oven. Each solenoid valve can be either manually or automatically activated. The detailed test reports can be printed out in 40 or 80 columns or read on the display screen. Initial and final weights can be added to test reports and the carbon residue will automatically be calculated at the end of the test. The instrument provides a front access to a condensing pot for easy cleaning of all ducts between the oven, the pot, and the chimney using the supplied accessory. The instrument is equipped with a RS232 connection for data transfer to s supervisor or LIMS system. In addition, the ticket printer (delivered with the apparatus) can be connected to a parallel output.

TEST METHOD:

Determines the amount of carbon residue formed after evaporation and pyrolysis of petroleum materials under certain conditions and is intended to provide some indication of the relative coke forming tendency of such materials.

FEATURES:

Maximum Test Temperature: 800°C

2 Preset methods: Micro-Carbon and Ash Tests

Provision for creating 18 additional methods with 4 heating segments each

Data Storage: 200 Results

Quick access to calibration parameters Auto Diagnostic

Automatically controlled atmosphere.

INCLUDED ACCESSORIES:

3 Vial Holders: Large, Small, and Mixed

 Cleaning Cable

 Hook for Safe Hot Lid Manipulation

 Pipes for Gas Connection

Operator Software and Serial Connection

Extension Pipe for Exhaust Chimney

Ticket Printer.