Chibek Instruments Limited

Chibek Instruments Limited

Showing 1–12 of 30 results

  • 0.00

    Full steel structure, body of cabinet made of 1.2~2mm cold-rolled steel, coated with epoxy resin power, or 1.2~2mm stainless steel materials.

    Inner materials: made of 8mm thick PP material. Out colors: based on customers’ requirements.

  • 0.00

    It uses high-quality aluminum alloy section material coated with epoxy resin powder. All the parts relate to ABS. It can be equipped with wood or aluminum alloy cabinet with various styles and function. The whole structure can be formed freely as per requirement. The bench is with light weight, good appearance, strong weight loading capacity, long lifetime. Also, it’s easy to be assembled and dissembled. Worktop can choose lab-grade phenolic resins worktop, or epoxy resin worktop, or ceramic worktop, or artificial stone worktop and stainless steel as worktop.

  • 0.00

    The Biosafety Cabinet is a safety device to protect the personnel, environment, and product. It is the most commonly used containment device for work with biohazardous agents or materials. During operations, it helps avoid expound to possible infectious aerosols and spills for the operation of experimental material of bio-hazardous, nature microbial strains or clinical diagnostic inspection sample. This Biosafety Cabinet is widely used in biological experiments the most important barrier (Primary Barrier) and frontline defense for the safety of the operator. Biological safety cabinets that are installed, certified, and used correctly offer user, environmental, and product protection from biohazards.

    Class II type A2 Biosafety Cabinets currently dominate the market in popularity among all Biosafety Cabinets. They are designed to work with agents that require Biosafety Level 1 – 3 containment and minimize hazards. A2 Biosafety Cabinets maintain negative pressure environments inside the cabinet during operation to prevent the contaminants from escaping the work area to protect the employees.

    To protect the product, approximately 70% of the room air is pressurized by the blower and forced through the supply HEPA filter prior to entering the work area. Finally, the remaining 30% of air is filtered through an exhaust HEPA filter. The sterile air finally exits the cabinet and is released back into the environment.

    Application areas: Hospitals, Universities, Research Centers, Pharmaceutical Companies, and Biological/life science laboratory

  • 0.00

    The Biosafety Cabinet is a safety device to protect the personnel, environment, and product. It is the most commonly used containment device for work with biohazardous agents or materials. During operations, it helps avoid expound to possible infectious aerosols and spills for the operation of experimental material of bio-hazardous, nature microbial strains or clinical diagnostic inspection sample. This Biosafety Cabinet is widely used in biological experiments the most important barrier (Primary Barrier) and frontline defense for the safety of the operator. Biological safety cabinets that are installed, certified, and used correctly offer user, environmental, and product protection from biohazards.

    Class II type A2 Biosafety Cabinets currently dominate the market in popularity among all Biosafety Cabinets. They are designed to work with agents that require Biosafety Level 1 – 3 containment and minimize hazards. A2 Biosafety Cabinets maintain negative pressure environments inside the cabinet during operation to prevent the contaminants from escaping the work area to protect the employees.

    To protect the product, approximately 70% of the room air is pressurized by the blower and forced through the supply HEPA filter prior to entering the work area. Finally, the remaining 30% of air is filtered through an exhaust HEPA filter. The sterile air finally exits the cabinet and is released back into the environment.

    Application areas: Hospitals, Universities, Research Centers, Pharmaceutical Companies, and Biological/life science laboratory

  • 0.00

    C-frame is more flexible with simple structure. It selects 60*40/60*30mm square steel, phosphating and pickling
    treatment for surface, epoxy resin powder paint, no prominent section-block, smooth charm, outstanding acid-proof, and alkali-proof performance. Stainless steel and rubber adjustable feet, it’s damping-proof, shipper proof, corrosive-proof. It’s with shock absorbing function and with better weight bearing. The adjustable height is 30~50mm and its bearing capacity can reach above 150KG. C-frame can choose suspended cabinet and push drawer structure. They are easy to be cleaned, assembled, and dissembled. Worktop can choose lab-grade phenolic resins worktop, or epoxy resin worktop, or ceramic worktop, or artificial stone worktop and stainless steel as worktop.

  • 0.00

    Space has been extended. It furnishes more space for operating and instruments. Space has been used to reach its maximum by reasonable space combining.

    Introduction: Cabinet Structure: Material: All steel covered with
    electrostatic spraying after folding, welding, polishing, acid cleaning, phosphorylation, chemical resistance. Inner liner panel: Imported from America, 6mm compact panel, acid
    and alkali resistance, temperature-resistance, anti-moisture.
    Guide plate: Imported from America, 6mm compact panel, reasonable and knock-down guide structure. Concentrated and effective discharge air, letting off different poisonous gas.
    Window: 6mm thickness steel safe glass, balancing form elevation and subsidence, it can be stopped at any position by pulling.
    Lighting equipment: 30W antisepsis daylight lamp, lamp house is insulated with gas. Lightness on table not lower than 400LUX.
    Operation Table board: lab-grade phenolic resins worktop, or epoxy resin worktop, or ceramic worktop and stainless steel as worktop
    Operation panel: lighting switch, ON/OFF switch, two sets of 220V/10A versatile electric socket. vertical and single test cock: made by yellow brass, the surface is
    treated by EPOXY baking paint. Cup slot: acid and alkali resistance, PP
    water cup

    Airflow(m3/s):2400~3500

  • 0.00

    Space has been extended. It furnishes more space for operating and instruments. Space has been used to reach its maximum by reasonable space combining.

    Introduction: Cabinet Structure: Material: All steel covered with
    electrostatic spraying after folding, welding, polishing, acid cleaning, phosphorylation, chemical resistance. Inner liner panel: Imported from America, 6mm compact panel, acid
    and alkali resistance, temperature-resistance, anti-moisture.
    Guide plate: Imported from America, 6mm compact panel, reasonable and knock-down guide structure. Concentrated and effective discharge air, letting off different poisonous gas.
    Window: 6mm thickness steel safe glass, balancing form elevation and subsidence, it can be stopped at any position by pulling.
    Lighting equipment: 30W antisepsis daylight lamp, lamp house is insulated with gas. Lightness on table not lower than 400LUX.
    Operation Table board: lab-grade phenolic resins worktop, or epoxy resin worktop, or ceramic worktop and stainless steel as worktop
    Operation panel: lighting switch, ON/OFF switch, two sets of 220V/10A versatile electric socket. vertical and single test cock: made by yellow brass, the surface is
    treated by EPOXY baking paint. Cup slot: acid and alkali resistance, PP
    water cup

    Airflow(m3/s):2400~3500

  • 0.00

    Full steel structure, body of cabinet made of 1.2~2mm cold-rolled steel, coated with epoxy resin power, or 1.2~2mm stainless steel materials. Colors: based on customers’ requirements.

  • 0.00

    The body is using selected 1.0mm thickness first-class cold/galvanized steel sheet, automatic skimmers forming, phosphating and pickling treatment for surface, epoxy resin powder, smooth charm, outstanding acid-proof, and alkali-proof performance. With glass window, safe and secure.

  • 0.00

    Full wood structure, it’s made of melamine decoration plate and coupled with some accessories such as plywood, flakeboard and medium density fiberboard. Per the different geographic &climate, selecting plate from different source reasonably to meet the requirements for laboratory use. It mainly has the following features: Reasonable price, rich resource of wood for selection, easy to make and shape stylish; colourfur easy for installation and after-sale service; Excellent alkali-proof &acid-proof.
    Doors: wooden doors, built-in 5mm thick glass.

    Shelf made of 8mm thick PP or 4 mm thick APCP. Put the bottom of the cabinet with sink, made of 8mm thick PP. Different sizes are available

  • 0.00

    The Steel & Wood lab bench includes two kinds of structure. H-frame works better with heavy bearing. It selects 40×60/30x30mm square steel, phosphating and pickling treatment surface, epoxy resin powder paint, no prominent section-block, smooth charm, outstanding acid-proof, and alkali-proof performance. Stainless steel and rubber adjustable feet. It’s damping-proof, corrosive-proof. It’s with shock absorbing function and with better weight bearing. The adjustable height is 30-50mm and its bearing capacity can reach above 150KG. Steal H-frame can meet the requirements of using large-scale precision and can hold more than 500KG weight. Worktop can choose lab-grade phenolic resin, Trespa, epoxy resin, ceramicist exclusive table material.

  • 1,269,600.00

    Cabinet Structure: Material: All steel (1.2mm cold-rolling steel) covered with electrostatic spraying after folding, welding, polishing, acid cleaning, phosphorylation, chemical resistance.
    Inner liner panel: Imported from America, 6mm compact panel, acid and alkali resistance, temperature-resistance, anti-moisture. Guide plate: Imported from America, 6mm compact panel, reasonable and knock-down guide structure. Concentrated and effective discharge air,
    letting off different poisonous gas.
    Operation Table board: lab-grade phenolic resins worktop, or epoxy resin worktop, or ceramic worktop and stainless steel as worktop.
    Window: 6mm thickness steel safe glass, balancing form elevation and subsidence, it can be stopped at any position by pulling. Lighting equipment: 30W antisepsis daylight lamp, lamp house is insulated with gas. Lightness on table not lower than 400LUX.
    Operation panel: lighting switch, ON/OFF switch, two sets of 220V/10A versatile electric socket.
    Ventilation equipment: selecting rust-resistance, low wasting, low noise and famous fan and special wind tube. Noise can be reduced at about 55 DB.
    Accessories: Vertical and single test cock: made by yellow brass, the surface is treated
    by EPOXY baking paint.

    Cup slot: acid and alkali resistance, PP water cup

    Airflow(m3/s):1200~1800

Pickup/Delivery Options

Fantastic After Sales Support

Guaranteed Quality

Contact Us

Brands
X